RouterOS v6.22 candidate special
اطلقت شركة ميكروتيك النسخة الجديدة
تحمل الرقم 6.22
الجديد فى النسخة
اطلقت شركة ميكروتيك النسخة الجديدة
تحمل الرقم 6.22
الجديد فى النسخة
What's new in 6.22 (2014-Nov-11 14:46):
*) ovpn - added support for null crypto;
*) files - allow to remove empty disk folders;
*) sntp - fix problems with dns name resolving failures that were triggering
system watchdog timeout;
*) eoip/eoipv6/gre/gre6/ipip/ipipv6/6to4 tunnels have new features:
tunnels go down when no route to destination;
tunnels go down for 1 minute when transmit loop detected, warning gets logged;
new keepalive-retries setting;
keepalives enabled by default for new tunnels (10sec interval, 10 retries);
*) improved connection-state matcher in firewall - can match multiple states in one rule, supports negation;
*) added connection-nat-state matcher - can match connections that are srcnatted,dstnatted or both;
*) 100% CPU load caused by DNS service fixed;
*) 100% CPU load caused by unclassified services fixed;
*) 6to4 tunnel fixed;
*) new RouterBOOT firmware for Metal 2SHPn to improve wireless stability;
mipsbe
CRS series, RB4xx series, RB7xx series, RB9xx series, RB2011 series, SXT, OmniTik, Groove, METAL, SEXTANT
حمل ...........هنـــــــــــــا x86
PC / X86, RB230 series
PC / X86, RB230 series
حمل........هنـــــــــــــــا
ppc
RB3xx series, RB600 series, RB800 series, RB1xxx series
RB3xx series, RB600 series, RB800 series, RB1xxx series
حمل... هنــــــــــــــــا
mipsle
RB1xx series, RB5xx series, RB Crossroads
RB1xx series, RB5xx series, RB Crossroads
tile
CCR series
CCR series
حمل... هنـــــــــــــــــــــا
ALL
All system downloads in one torrent file
All system downloads in one torrent file
حمل.... هنــــــــــــــــــــــــــــا
واعلنوا عن توافر نظام الجديد للتحكم فى الوايرليس
We have CAPsMAN v2 ready for testing.
wireless-cm2-6.22rc-tile.npk
wireless-cm2-6.22rc-mipsbe.npk
wireless-cm2-6.22rc-x86.npk
wireless-cm2-6.22rc-ppc.npk
wireless-cm2-6.22rc-mipsle.npk
Note: CAPsMAN v2 is NOT compatible with current CAPsMAN v1 (CAPsMAN v1 CAP devices will not be able to connect to CAPsMAN v2 and CAPsMAN v2 CAP devices will not be able to connect to CAPsMAN v1). It means that both CAPsMAN and CAP devices should have wireless-cm2 package installed in order to make CAPsMAN v2 system to work. If you want to try out the CAPsMAN v2 upgrade all the CAPs and the CAPsMAN to latest RouterOS version and install wireless-cm2 package.
CAPsMAN v2 features:
CAPsMAN automatic upgrade of all CAP clients (configurable)
improved CAP<->CAPsMAN data connection protocol
added "Name Format" and "Name Prefix" setting for Provision rules
improved logging entries when client roams between the CAPs
added L2 Path MTU discovery
Upgrade options from v1 to v2:
Option1: Install a new temporary CAPsMAN v2 router in same network where the current CAPsMAN router is and start upgrading CAPs with wireless-cm2 package. All CAPs with the v2 will connect to the new temporary CAPsMAN v2 router. After every CAP is upgraded to v2, upgrade your current CAPsMAN to v2 and then turn off the temporary CAPsMAN v2 router.
Option2: Upgrade your CAPs and then CAPsMAN to v2 at the same time. In this case you could have little more downtime unless you schedule all the CAPs to reboot/install at the same time.
wireless-cm2-6.22rc-tile.npk
wireless-cm2-6.22rc-mipsbe.npk
wireless-cm2-6.22rc-x86.npk
wireless-cm2-6.22rc-ppc.npk
wireless-cm2-6.22rc-mipsle.npk
Note: CAPsMAN v2 is NOT compatible with current CAPsMAN v1 (CAPsMAN v1 CAP devices will not be able to connect to CAPsMAN v2 and CAPsMAN v2 CAP devices will not be able to connect to CAPsMAN v1). It means that both CAPsMAN and CAP devices should have wireless-cm2 package installed in order to make CAPsMAN v2 system to work. If you want to try out the CAPsMAN v2 upgrade all the CAPs and the CAPsMAN to latest RouterOS version and install wireless-cm2 package.
CAPsMAN v2 features:
CAPsMAN automatic upgrade of all CAP clients (configurable)
improved CAP<->CAPsMAN data connection protocol
added "Name Format" and "Name Prefix" setting for Provision rules
improved logging entries when client roams between the CAPs
added L2 Path MTU discovery
Upgrade options from v1 to v2:
Option1: Install a new temporary CAPsMAN v2 router in same network where the current CAPsMAN router is and start upgrading CAPs with wireless-cm2 package. All CAPs with the v2 will connect to the new temporary CAPsMAN v2 router. After every CAP is upgraded to v2, upgrade your current CAPsMAN to v2 and then turn off the temporary CAPsMAN v2 router.
Option2: Upgrade your CAPs and then CAPsMAN to v2 at the same time. In this case you could have little more downtime unless you schedule all the CAPs to reboot/install at the same time.
0 التعليقات:
إرسال تعليق